Top fill not smooth

[ImpulsiveJames]

Hi, I've been using Kisslicer for years now and absolutely love it! I just switched from a .3mm nozzle to a .8mm nozzle for some larger projects and ran into some issues. Mainly the top layer is not smooth and not melting together like with my last nozzle. I changed to .8mm in the printer settings and changed some of the stepover settings, but no luck.

PXL_20201120_061841364.jpg (2.41 MiB) Viewed 2751 times

PXL_20201120_061849581.jpg (2.63 MiB) Viewed 2751 times

kisslicer settings.jpg (123.57 KiB) Viewed 2751 times

[ImpulsiveJames]

Of course the second I post something, I find the setting. Is the correct setting called "Loop/Solid Infill Overlap"? I just changed it from .50 to 1.00

Printing a test print now, will know more in an hour or so

[ImpulsiveJames]

Nope, same thing. Doesn't look like anything changed at all

[frozen.rabbit]

Set extrusion with to 0.8.
Set overlap to 1.8 or 1.9. This only affects the infill to perimeter overlap, not infill to infill overlap.

Every slicer I have ever used, I enter the actual nozzle size for extrusion width.

Perimeter last gives better dimensional accuracy.

[ImpulsiveJames]

Apparently I'm a moron.... This nozzle is labeled as .8 but is actually 1.0....explains a lot.